Common faults of linear vibrating screen and their solutions
Linear vibrating screen is one of the commonly used screening equipment.It has the advantages of high screening efficiency,high screening quality,and large processing capacity,and is favored by customers.Then the editor of Hiside below analyzes the common faults during operation of the linear vibrating screen and gives solutions.
1. The problem of vibration
When the linear vibrating screen is screened,the material on the screen surface is discontinuous,and the vibrating screen has vibration problems when starting and stopping.The solution to such problems is to adjust the position of the eccentric wheel and increase the mass of the eccentric wheel.Another:The occurrence of such problems will reduce the service life of the spring and should be resolved in time.
2. The bearing is damage
The bearing seat of the linear vibrating screen is easy to vibrate,the bearing is easy to be damaged by heating,and the bottom beam of the screen is easy to weld or break.The problem is that the mass of the eccentric wheel of the sieve machine is too large,which results in the increase of the exciting force and the increase of the amplitude of the sieve.The common solution is to reduce the mass of the eccentric or change a spring with a larger stiffness to deal with it.Under the premise of ensuring the strength of the shaft,it can be dealt with by changing different types of bearings or changing the strength of the bearing seat.At the same time,the necessary reinforcement of the bottom beam of the screen machine can also extend the service life of the screen.
3. Low amplitude
The amplitude of the linear vibrating screen is lower than the required parameters.The detailed performance is that the amplitude is too low.If the amplitude is low,it will reduce the overall treatment effect of the linear vibrating screen;on the contrary,if it is the amplitude of the linear vibrating screen If the condition is too high,it will have a certain impact on the service life of the bearing seat,bearing,and bottom beam of the vibrating screen.Therefore,under normal conditions,the user can directly modify the quality of the eccentric wheel directly according to the conditions of the application site of the linear vibrating screen,or use springs of different stiffness to adjust the amplitude of the linear vibrating screen to a certain extent,thereby Meet the needs of production.
The general introduction to the common faults and solutions during the operation of the linear vibrating screen is the above.In order to ensure the quality of the vibrating screen,everyone is welcome to buy the vibrating screen of Hiside.The product is of excellent quality and outstanding performance.Please contact us if you are interested.